篮球竞彩分析吧 :CIMSՓĵ

򾺲 www.fasfz.com

 


ѵ1ƪ

ֲʽWjоļеđ
^ȫՈc朽
ע⣺ڡCеcӡ(19995:1518)s־l
ʹՈע³̎

ꐕԴ Ա T
BWCIMSB116023

ժҪӋCgWjgϢgİlչֲʽWjоĵQ˼glĽY҇˷ֲʽWjоĵشwϵYеđϣ҇й_չЩ̽
PI~ֲʽWjо,CORBA

Distributed Networked Research Center and Its Application in Agile Manufacturing

Chen Xiao-Chuan, Liu Xiao-Bing, Zhang Bao-Bao ,Feng Xin-An
(Dalian University of Technology, CIMS Centre,116023)

Abstract:With the development of computer, network and information technology, the Distributed Networked Research Center(DNRC) may be established. In this paper, we analyzed the important role of DNRC and its architecture according to Chinese conditions. Then we proposed some applications in agile manufacturing. We hope our work will be beneficial to our manufacturing sector.
keywords: Distributed Networked Research Center, Agile Manufacturing, CORBA


ѵ2ƪ

aģʽ׃c
^ȫՈc朽
ע⣺ՓڡI̡(19992(3):1317)s־l
ʹՈע³̎

w Ա SǷ
(BWCIMS|B116023)

ժҪ:ڷaģʽ׃ĻAӑՓaģʽ׃ĸڅJǑPעõaģʽҪBȺF̽˼҇IԺ͸Čʩ
PI~aģʽ; ; ; ӑB“
ЈDYϷ̖ F270.7

The Evolution of Manufacturing Production Mode and Agile Manufacturing

Zhao Wei Liu Xiaobing Xu Dengfeng
(CIMS Center of Dalian University of Technology, Dalian, 116023)

Abstract: Abstract This paper analyzes the evolution of manufacturing production mode, discusses the causes and trend of the evolution, and argues agile manufacturing is a desirable mode, then introduces agile manufacturing briefly, studies how to enhance national enterprisesagility and competition by using agile manufacturing.
Key words Production Mode; Agile Manufacturing; Agility; Virtual Enterprise


ѵ3ƪ

IϢc
^ȫՈc朽
ע⣺Փڡ863/CIMSNETOؑcӑ(20005)l
ʹՈע³̎
āԴCIMSNETؑcӑ

h R
ϺͨWCеWԺ
200030

ժҪSWjgİlչϢHѽɞaIěQ߀Sڴ˱ķеϢUIϢFWj̵ľwʩеPIg
PI~: Ϣ Wj

Research On Network-based Agile Manufacturing

Yan JunqiNi YanrongMa Dengzhe
Mechanical Engineering Department, Shanghai Jiaotong University, Shanghai 200030

Abstract:With the development of network technology, information becomes not only the crucial dominate factor of manufacturing but also the active drive factor of manufacturing. Under the background, this thesis analysis the information demands of manufacturing and clarify the actuality in agile manufacturing .The thesis also bring forward how carry the agile manufacturing scheme into execution. The scheme includes some key technology.
Key Words: Information Agile Manufacturing Network


ѵ4ƪ

͏saƷcaĄӑB“ģʽ
dՓȫՈc朽
ע⣺ՓڡӋCϵyCIMS(2000,6(5):1-7)s־l
ʹՈע³̎

w桡
AW

ժҪ˴͏saƷOӋcacԼӑB“Iķcڴ˻ Amϴ͏saƷOӋacaƷյķA΄ӑB“ģʽ 䌍ʩӑB“˻I֮gͶY䆖}M̽ӑÌH ģʽM˷
PI~ӑB“͏saƷaƷOӋaƷaƷ
ЈD̖TB472N945.12īIRaA
¾̖1006-5911 (2000)05-0001-07

Dynamic Alliance Mode for Developing Large-sized and Complex Products

ZHAO Tian-qi, CHEN Yu-liu
(Department of Automation, Tsinghua University,Beijing100084,P.R.China)

AbstractBased on the analysis of the designing and production processes of L arge-sized and Complex Product, this paper proposes a relevant multistage dynamic cooperating mode and its implementation schemes according to the research on the characteristics and category of Dynamic Alliance. The problems of the investment and interestassignment of partner enterprises are discussed. Three application cases o f this mode are provided at the end.
Key words: dynamic alliance; large-sized and complex product; product development; product manufacturing; product service


ѵ5ƪ

IؽMоcʩ
^ȫՈc朽
ע⣺ՓڡϺWW(ȻƌW)(1999,5(4):333-336)s־l
ʹՈע³̎

ơγ
(ϺW CIMS&C, Ϻ 200072)

ժҪȽBIؽMĸʩ,CIMSʩS?ͨسΪ?ͨ^IĿǰĘI,YϹϢϵy_l͌ʩ,ؽII,ϢgµĹģʽY,ʹI[ÓĿǰ.
PI~:I;ؽ;CIMS
ЈD̖:F 406īIRa:A

Research and Application of BPR

CHEN Yun,GONG Tian-gen,HE Cheng-li,FANG Ming-lun
(CIMS Center, Shanghai University, Shanghai 200072, China)

Abstract: Some theories and methods on how to carry into execution of BPR are discussed, and an example on Huatong Switch Plant is given. Analyzing current flow, combining development and executing manage information system, reengineering corporation operation's flow, banding together information technology and manage pattern, it is order to get rid of current puzzle of the plant.
Key words: business process; reengineering; CIMS


ѵ6ƪ

^YԴIӑB“wϵо 
dՓȫՈc朽
ע⣺ՓѽڡMϙCcԄӻӹg(1998,11:4346)s־l
ʹՈעՓăݳ̎
 
w,Ա 
(BWCIMS|B116023)

ժҪ: ҇IЈ׃ԭ֮һYԴwͲᘌ@һ}\ÄӑB“˼뽨^IgYԴ“Լӏ“IYԴĶЈoˌʩ
PI~: ,ӑB“,YԴC

Research on league system of enterprise of joint management for zone resources

Zhao Wei Liu Xiaobing
(CIMS Center of Dalian University of Technology, Dalian, 116023)

Abstract: One of the causes lead to national enterprises' bad response to market lies in unbalance and lack of design and manufacturing resources. To solve this problem, this paper proposes a view of resources virtual organization among enterprises in a zone based on the idea of dynamic enterprise organization and gives realization ways.
Keywords: agile manufacturing; dynamic enterprise organization; optimal utilization of manufacturing resources


ѵ7ƪ

WjhµĄӑBIģ 
dՓȫՈc朽

ע⣺ՓѽڡCе̌W(2002,38(6):3135)s־l
ʹՈעՓăݳ̎
 
w
(AWCIMS̼gо, 100084 )


ժҪڷyCIMSIģԵĻA̽ӑ˾Wjh̓MIĄӑBģ}о̓MIģ͵Ęɺc؄enjҕDāԴM˷˾Wjhµķֲʽfͬģ^ӑՓ˾Wjfͬ?lļоR?ȻhһNӑBIģߵąYՓ˃ɂҪļg֧I֪Rɺ͌ӑBIģ͵ܷcCur
PI~: Wj ӑBIģ I֪R ̓MI CIMS

DYNAMIC ENTERPRISE MODELING UNDER NETWORK MANUFACTURING
Zhao Bo , Fan Yushun
(National CIMS Engineering Research Center, Tsinghua University)

Abstract: On the base of analyzing the limitation of modeling of traditional CIMS enterprise, Dynamic modeling for virtual enterprise under network manufacturing is discussed. Firstly, the structure and feature of virtual enterprise model is presented. Creating of all sorts of the views in such model is particularly analyzed. Secondly, the process of distributed and synergic modeling under network is surveyed. Some facets of such mechanism are pointed out. Then a referenced architecture of dynamic enterprise model tools is recommended. Finally, two important technical auspice, multi enterprise knowledge integration and capability analyzing & general evaluation for dynamic enterprise model are discussed.
Key words: Network manufacturing Dynamic enterprise modeling Multi enterprise knowledge integration Virtual enterprise


ѵ8ƪ

I؅fͬOӋcMVPNо
dՓȫՈc朽
ע⣺ՓѽCеOӋc졷(2003, 2:107-109)
m
ϺWCIMS ͙CϺ200072

ժҪI؅fͬOӋcľwҪlYVPN gaƷڹPLMgIϢgԵc̓ԵI؅fͬOӋc̓MþWMVPNՓЧQYԴDQͬԼݔȫƿi}ͨ^ϺWMVPN(SHU-MVPN)ԇ\CԓՓĿImҵЈMЮaƷһЩ̽
PI~
؅fͬOӋc̓MþWaƷڹ̓MþW


ѵ9ƪ

CPCMVPNĿOӋcһwϵyо
dՓȫՈc朽
ע⣺ՓѽMϙCcԄӻӹg(2002,7:66-68)s־l
ʹՈעՓăݳ̎

m1 ᡡ1 ʩ2 1
1. ϺWCIMS cC,??00072 ; 
2. ϺWӋCϵ,??00072

ժҪ:쌣þW(MVPN) ĸ,ȻϺW칤Ğ,˻CPC MVPN ĿOӋһwϵyԓϵyCPC aƷϢļƽ_,MVPN Wjİȫ,ЧؽQ˿OӋͿдڵƿi},Mһչ䑪I,һՓ͌Ãrֵ
PI~:쌣þW(MVPN) ;aƷfͬ̄(CPC) ;OӋһw
ЈD̖: TP39 ¾̖:1001 - 2265 (2002) 07 - 0066 - 03

Research on integrated rapid design and manufacture system based on CPC and MVPN
L IU Lilan, YU Tao, SHI Zhanbei, FAN G Minglun

Abstract:The concept of manufacture virtual private network (MVPN) is brought forward in this article. Then , using SHU Rapid Manufacture Center as the instance , the integrated rapid design and manufacture system based on CPC and  MVPN is established. With CPC as the integrating platform of information and data , MVPN as the physical web - supporting framework ,the system effectively resolves the primary problems in rapid design and manufacture , further extends its application field. This integrated system has far - reaching theoretic and practicing value.
Key words : manufacture virtual private network (MVPN) ;collaborative product commerce (CPC) ;integrated rapid  design and manufacture system

 


 

| CIMSՓ | ̓M | | Փ | Ŀ_l | WgYԴ | վȫ | MՓľWվȫ |


line.gif (4535 ֹ)

˸õĞҷgӭӱվͶƱ{

򾺲 Ոc

վ򾺲 gӭL

ע⣺վδSDd

All rights reserved, all contents copyright 2000-2019

վ20003¿WL